Main range of productModicon Quantum automation platform product or component typeSafety dc discrete output module Complementary discrete output number16 group of channels1 discrete output logicPositive logic (source) addressing requirement4 output words7 input words discrete output voltage19.2...30 V DC absolute maximum output34 V voltage drop<= 0.3 V 0.5 A sensor power supply19.2...30 V maximum load current<= 0.65 A each point<= 10.04 A each group surge current2 A for 10 ms response time<= 20 ms at state 0 to state 1<= 20 ms at state 1 to state 0 leakage current0.5 mA 30 V protection typeWith load inductanceInductance(H) = 0.5/((current(A))² x (switching frequency(Hz)))0.5 8 Hz fault indicationChannel faultOverloadPower supply faultSystem fault associated fuse rating10 A isolation between channels and bus1500 Vrms for 1 minute isolation between group and bus1500 Vrms for 1 minute power dissipation1.9 W + 0.65 I² markingCE local signalling1 LED green bus communication is present (Active)1 LED red external fault detected (F)16 LEDs green output status16 LEDs red system failure, diagnostic of internal channel fault bus current requirement350 mA Environment product certificationsCSACSA HazLocC-TickTÜV Rheinland (SIL2)UL Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profile Product end of life instructionsAvailable Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CertificateSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsRacks for Modules MountingDimensions of Modules and Racks(1)2 slots(2)3 slots(3)4 slots(4)6 slots(5)10 slots(6)16 slots
Connections and Schema24 Vdc/0.5 A Source Overload Detection 16-Channel Digital Output ModuleWiring Diagramfuse:10 A max (determined by the module load current), fast blowpre-act:pre-actuator
NOTE: There is only one group of 16 outputs. All common 24 V are internally connected and all common 0V are also internally connected. The two pins of a same input (e. g: pin 1 and 2 for input 1) are internally connected too so that you can use either the right pin or the left one.